End Dump Semi Trailer

End Dump Semi Trailer

End Dump Semi Trailer

Chengda 3 axle 35-40 CBM end dump semi trailer (rear tipper) engineered for bulk ore, sand, and aggregate haulage. Featuring front HYVA hydraulic cylinder, U-shape or square high-strength box, and FUWA 16T axles.

Product Details

The Chengda 3 Axle 35 to 40 Cubic Meter (CBM) End Dump Semi Trailer (rear tipping semi-trailer) is engineered for high-tonnage mining haulage, transporting bauxite, iron ore, coal, crushed aggregate, and quarry materials. Powered by a front-mounted multi-stage HYVA telescopic hydraulic cylinder and resting on a reinforced high-strength steel chassis with 3x 16-Ton FUWA / BPW heavy-duty axles, this rear tipper delivers rapid unloading cycles, superior tipping stability, and maximum payload durability under severe African and South American off-highway operations.

Chengda 3 axle 35-40 CBM end dump semi trailer rear tipper for mining aggregate transport

1. Technical Engineering Specifications

Official export specification standards for the 3 Axle End Dump Semi Trailer:

Engineering ParameterTechnical Specification Standard
Rated Cargo Volume35 CBM to 40 CBM (Approx. 45 to 60 Metric Tons payload capacity)
Overall Dimensions (L x W x H)9,800 x 2,550 x 3,600 mm (Custom box dimensions available)
Cargo Body TypeReinforced U-Shape (Half-pipe) or Rectangular Square Box
Cargo Box Steel MaterialQ345B High-Tensile Manganese Steel (Optional wear-resistant Hardox 450)
Cargo Box ThicknessFloor: 8 mm / 10 mm; Side Walls: 6 mm / 8 mm (Hardened against rock impacts)
Hydraulic Tipping MechanismGenuine HYVA Front-Lifting Telescopic Cylinder (FC214 / FC191 series)
Axle Brand & Load Rating3 x 13-Ton or 3 x 16-Ton FUWA / BPW heavy-duty cast hub axles
Chassis Main BeamHeavy submerged-arc welded I-beam: Top flange 16 mm, Bottom 18 mm, Web 10 mm
Mechanical SuspensionHeavy-duty 10-leaf suspension with cast steel equalizers and 90mm width springs
Tires & Wheel Rims12 units + 1 spare: 12.00R20 or 315/80R22.5 heavy mining radial tires
Tailgate Locking SystemHeavy mechanical linkage with automated pneumatic release upon tipping elevation
Landing GearJOST or standard 28-Ton two-speed manual landing legs with flat shoes

2. Critical Anti-Rollover & Operational Durability Features

  • U-Shape Aerodynamic Half-Pipe Body: The curved U-shape cross section eliminates interior 90-degree corners, ensuring wet bauxite, sticky clay, or fine sand slides cleanly toward the tailgate without sticking, dramatically lowering tipping resistance.
  • Lower Center of Gravity (Anti-Rollover): By nesting the U-body lower between the chassis frame rails, the trailer's center of gravity is lowered by 150mm compared to traditional rectangular boxes, preventing tip-over accidents on soft or uneven mining spoil tips.
  • Heavy Hydraulic Protection: Equipped with an automated stroke-limiting valve to prevent over-extension of the HYVA cylinder, and dual hydraulic check valves to avoid sudden bed collapse in the event of hose puncture.
  • Heavy-Duty Rear Hinge Pivot: Extra-wide 100mm forged alloy hinge pins with greaseable bronze bushings distribute immense torsional stress during the final 45-degree tipping stage.

HYVA hydraulic cylinder and rear tailgate linkage on end dump semi trailer

3. Frequently Asked Questions (FAQ)

Q1: What is the benefit of a U-shape body over a traditional rectangular box?

A: U-shape dump trailers discharge sticky or cohesive minerals faster with less residue, maintain higher structural rigidity with fewer external stiffeners, and lower the rollover risk on unpaved discharge ramps.

Q2: Can this trailer be towed by Howo or Shacman 6x4 prime movers?

A: Yes, it is fully paired with our Shacman X3000 6x4 Tractor Truck or Howo 6x4 tractor head with a 50# or 90# fifth wheel.