Loader

Loader

Wheel loaders and backhoe loaders carry the highest utilization hours on most construction and quarry sites. Selecting the right loader class controls cycle time, fuel burn per cubic meter and hydraulic component life. Chengda supplies factory-direct loaders from 1 ton to 10 tons, matched to African, Latin American and Southeast Asian working conditions.

1. Application & Bucket Sizing

The correct class depends on haul distance, material density and the loading equipment already on site. The table below summarizes how each class is normally applied:

  • 1 - 3 ton compact class (backhoe loaders): municipal trenching, utility repair, small-site material handling. The backhoe arm gives one machine both digging and loading capability.
  • 3 - 5 ton mid class: general construction material handling, quarry stockpile work and ready-mix plant feeding.
  • 5 - 10 ton heavy class: high-volume quarry face loading, port bulk cargo handling and mining stockpile reclaim.

2. Core Technical Specifications

Representative export configurations. Final specification is confirmed against the destination market's axle-load and emission requirements.

Parameter1.5-3T Backhoe3-5T Wheel Loader5-7T Wheel Loader7-10T Wheel Loader
Rated load1,000 - 1,500 kg3,000 - 3,500 kg5,000 kg7,000 - 10,000 kg
Bucket capacity0.2 - 0.3 m³1.7 - 2.0 m³3.0 m³4.0 - 5.0 m³
EngineCummins / Weichai 74-97 kWWeichai 92-118 kWWeichai 162 kWCummins 175-220 kW
TransmissionSynchro shuttleCountershaft power shiftCountershaft power shiftZF / countershaft power shift
Dump clearance2,600 mm2,950 mm3,100 mm3,200 mm
Typical applicationMunicipal / utilityConstruction siteQuarry stockpileMining / port bulk

3. Ocean Freight & Port Sourcing

Loaders under 5 tons ship inside a 40HQ container with the bucket and ROPS canopy removed; 5-10 ton units ship by 40ft Flat Rack or Ro-Ro. Chengda crates the bucket, pins and cylinder rods separately so salt-water corrosion during a 30-40 day voyage does not damage machined surfaces.

4. Category Sourcing FAQ

Q1: Wheel loader or backhoe loader for a mixed municipal contract?

A: If the contract mixes trenching with stockpile loading, a 1.5-3 ton backhoe loader replaces two machines. If loading dominates, a 3-5 ton wheel loader delivers roughly double the hourly tonnage for the same capital outlay.

Q2: How many hours can a loader run before major overhaul?

A: A correctly maintained Weichai or Cummins powered loader reaches 8,000-10,000 hours before major engine overhaul, provided hydraulic oil is changed on a 1,000-hour interval and the transmission filter is serviced every 500 hours in dusty quarry conditions.

Q3: What attachments improve loader utilization?

A: Quick-coupler with pallet forks, a 4-in-1 bucket and a hydraulic breaker cover most mixed-site work. Chengda supplies the coupler and attachment package factory-fitted so the hydraulic circuit and warranty stay intact.

Need a Loader Matched to Your Site?

Request Factory Quote & Technical Datasheet
  • 1