

Motor graders are the single machine that determines whether a haul road stays serviceable. In civil earthmoving, mining haul road maintenance and infrastructure projects across Africa, Latin America and Central Asia, selecting the correct grader class controls grading cycle efficiency, blade wear cost and fleet downtime. Chengda supplies factory-direct heavy motor graders from 130HP to 242kW (~330HP), configured for high-temperature, abrasive laterite and rock conditions.
The correct class depends on haul distance, material density and the loading equipment already on site. The table below summarizes how each class is normally applied:
Representative export configurations. Final specification is confirmed against the destination market's axle-load and emission requirements.
| Parameter | 160HP Class | 190HP Class | 215-220HP Class | 242kW Mining Class |
|---|---|---|---|---|
| Engine power | 120 kW (160HP) | 142 kW (190HP) | 162 kW (220HP) | ~242 kW (330HP) |
| Operating weight | 15,500 - 16,500 kg | 16,000 - 17,000 kg | 16,500 - 17,500 kg | 25,000 - 27,000 kg |
| Moldboard length | 3,660 mm (12 ft) | 3,660 mm (12 ft) | 3,965 mm (13 ft) | 4,270 mm (14 ft) |
| Cutting edge | Hardox 450 | Hardox 450 | Hardox 450 | Hardox 450 reinforced |
| Max gradeability | 25% | 25% | 25% | 30% |
| Typical application | Municipal / rural road | Highway subgrade | Expressway / pit road | Open-pit mining haul road |
Grader units over 16 tons normally ship by 40ft Flat Rack container with the blade and cab unbolted to reduce overall height, or by Ro-Ro vessel fully assembled driven into the hold. For inland destinations such as Douala, Abidjan or Mombasa, Chengda provides timber-crated blade and ripper packs to keep break-bulk handling costs low.
Q1: Which grader class suits a 50-100 ton mining haul truck fleet?
A: The 215HP to 220HP class with a 13-14 ft heavy moldboard and rear ripper is the standard choice. It delivers enough blade load to maintain a crowned camber across a 12-15 m haul road while keeping rolling resistance near 2%, which is the threshold that protects truck tires.
Q2: How is a motor grader shipped to Africa?
A: Units below 18 tons ship in a 40ft Flat Rack with blade and cab removed; heavier mining graders move by Ro-Ro or break-bulk. Chengda provides the disassembly drawings and re-assembly torque chart with every shipment.
Q3: What wear parts should be stocked?
A: Moldboard cutting edges, end bits, scarifier teeth and circle drive pinions are the four highest-wear items. Chengda ships a 12-month or 2,000-hour spare kit with the machine so the grader is not idled waiting on imported parts.
Need a Grader Configured for Your Haul Road? Request Factory Quote & Technical Datasheet |