



Fuel tank semi-trailers are a regulated pressure-vessel-adjacent asset: compartment baffling, bottom loading and safety valves decide whether a fleet passes port and road inspection. For diesel, gasoline and Jet A-1 distribution across West Africa, Central Africa and Latin America, Chengda builds 2 to 4 axle fuel tankers from 20,000L to 50,000L with aluminium or carbon steel shells and full ADR-compatible fittings.
The correct class depends on haul distance, material density and the loading equipment already on site. The table below summarizes how each class is normally applied:
Representative export configurations. Final specification is confirmed against the destination market's axle-load and emission requirements.
| Parameter | 2 Axle 20-25 m³ | 3 Axle 30-40 m³ | 3 Axle 45 m³ | 4 Axle 50 m³ |
|---|---|---|---|---|
| Volume | 20,000 - 25,000 L | 30,000 - 40,000 L | 45,000 L | 50,000 L |
| Compartments | 2 - 3 | 3 - 5 | 5 - 6 | 6 |
| Shell material | Carbon steel Q235 / aluminium | Carbon steel / aluminium | Aluminium 5083 | Aluminium 5083 |
| Shell thickness | 5 mm / 4 mm | 5 mm / 4 mm | 6 mm / 5 mm | 6 mm / 5 mm |
| Axle | 2 x 13T FUWA | 3 x 13T FUWA/BPW | 3 x 16T BPW | 4 x 13T FUWA |
| Discharge | Gravity + PTO pump | Gravity + PTO pump | Bottom loading + API adaptor | Bottom loading + API adaptor |
A 45 m³ tanker ships most economically as break-bulk on deck or by Ro-Ro, since a 40ft Flat Rack cannot take the 2.5 m width and full length together. Chengda supplies the tank empty, nitrogen-purged and with all manhole covers removed and crated, satisfying most port authorities' gas-free certificate requirements.
Q1: Aluminium or carbon steel for a West African diesel fleet?
A: Aluminium saves roughly 1.5-2 tons of tare weight, which converts directly into payload on every trip, and it does not corrode internally. However, aluminium repair requires qualified welding that most remote workshops lack. For fleets operating far from a major city, carbon steel with an internal epoxy coating is the lower-risk choice.
Q2: What is required for bottom loading?
A: Bottom loading needs an API RP-1004 compatible adaptor, a vapour recovery line, an overfill protection sensor per compartment and an emergency shut-off valve. Chengda fits the complete kit so the trailer passes terminal loading-rack inspection on arrival.
Q3: How many compartments should a 45 m³ tanker have?
A: Five to six compartments is standard for multi-product delivery. More compartments mean more flexible drop sizes but add weight and cost; three compartments suit single-product bulk delivery where one drop size is acceptable.
Need a Fuel Tanker Built to Your Terminal Spec? Request Factory Quote & Technical Datasheet |